ORACLE Lighting Dual Function Amber/White Reverse LED Module for Jeep Gladiator JT Flush Tail Lights

Do you have an EU or GCC Spec Jeep Gladiator JT and want to install a set of ORACLE Lighting Jeep Gladiator Flush Mount Tail Lights but are concerned about losing your required Amber Turn Signal? These dual-function LED modules solve exactly that problem.

The reverse light retains its full brightness for white reverse illumination, while also adding a bright Amber switchback effect for turn signals - replacing the red taillight section flash with a proper amber indicator. Installation is straightforward: remove the original modules, install the new ones using the existing hardware, and connect to the existing connector with one added pin to the original plug.

Designed specifically for EU or GCC Spec Jeeps, but US Spec JT owners can also take advantage of these modules for off-road amber chase lighting by wiring the amber trigger wires to a switch.

• Plug & Play design - uses existing hardware and connector
• 10 high-powered LEDs per module for bright reverse illumination
• Bright Amber Switchback Effect for compliant rear turn signals
• Dual function - White reverse light + Amber turn signal in one module
• EU & GCC Spec compatible - meets amber rear indicator requirements
• US Spec compatible for off-road amber chase lighting use
• 1-Year Warranty

It's common to see red rear indicator lights on the road in the US on old and new vehicles alike. Most European vehicles sold in the US, such as BMW, use Amber turn signals because in many European countries, Amber signals are required on both the front and rear of the vehicle as turn indicators.

While both Red and Amber rear turn signals are compliant options in the US, many believe Amber lights offer a more distinct contrast between red brake lights and amber turn signals - improving visibility and safety.

By offering these modules with Amber-capable rear turn signals, the ORACLE Flush Tail Lights can now meet compliance criteria in countries such as Europe, South America, and the Middle East where a rear Amber indicator light is required.

Compatible with the following vehicles equipped with ORACLE Flush Mount LED Tail Lights:

• 2020-2026 Jeep Gladiator JT (EU Spec)
• 2020-2026 Jeep Gladiator JT (GCC Spec)
• 2020-2026 Jeep Gladiator JT (US Spec - off-road amber use only)

• (2) Dual Function Amber/White Reverse LED Modules
• Hardware for installation using existing connector

Installation is straightforward and plug-and-play:

1. Remove the original LED modules from your ORACLE Flush Mount Tail Lights
2. Install the new dual-function modules using the existing hardware
3. Connect to the existing connector - add the included pin to the original plug
4. For US Spec Jeeps: wire the amber trigger wires to a toggle switch for off-road chase lighting

Install Guide PDF