V2 | Flush Mount LED Tail Lights for Jeep Gladiator JT | Low-Profile | Plug-and-Play

• Double-diffusion architecture for smoother, more uniform light output
• Reduced hotspots for cleaner, more premium appearance
• Improved clarity and consistency of brake and running lights
• Enhanced surge protection against voltage spikes
• Improved CAN-bus compatibility for modern vehicles
• Over-voltage, under-voltage, and reverse polarity protection
• Plug-and-play installation - no changes needed
• Warranty doubled from 1 year to 2 years

Transform your Gladiator's rear end with premium flush-mount LED tail lights engineered specifically for the Jeep Gladiator JT. Designed to sit tight and low-profile against the truck bed, these lights deliver a clean OEM+ appearance while improving visibility and function.

The nearly flush wrap-around design keeps rear lighting visible from virtually any angle and helps reduce trail damage risk compared to factory tail lights. Signature perimeter lighting gives the truck a modern, high-end look, while the enhanced reverse output uses 10 high-powered LEDs.

A direct plug-and-play connection makes installation straightforward, and the housing supports the factory blind spot / cross-traffic sensor by allowing the OEM sensor to swap directly into the ORACLE housing.

• Flush-Mount Design: Sits nearly flush with the body for a clean, factory-plus appearance that eliminates the bulky OEM look.
• Full LED Technology: Brighter output and faster response than stock bulbs for improved safety and visibility.
• Direct Plug-and-Play Fit: Designed specifically for the Jeep Gladiator JT with OEM-style connectors and no cutting or splicing required.
• DOT / SAE Compliant: Street-legal performance for brake, turn signal, running light, and reverse functions.
• Durable Construction: Weather-sealed housing stands up to mud, dust, water, and temperature extremes for dependable off-road use.
• Engineered for Gladiator JT: Unlike generic options, these are built specifically for the JT's tailgate design, helping protect the lights from trail damage while delivering a premium custom appearance.

• Flush-mount design for a sleek, low-profile OEM+ appearance
• Wrap-around tail light visibility for improved rear-angle visibility
• Signature perimeter lighting for a modern premium look
• 10 high-powered reverse LEDs for enhanced rear illumination
• Compatible with factory blind spot / cross-traffic sensor transfer
• Direct plug-and-play installation using OEM connectors
• Available with standard or tinted lens options
• DOT / SAE compliant
• 2-Year Warranty

• (1) Pair Flush Mount LED Tail Lights for Jeep Gladiator JT
• (1) Online Instruction Guide

If your package did not include the resistors, please contact Customer Support here.

North American models: These lights are designed for North American Jeep Gladiator JT models. For European or Export Jeeps, we recommend upgrading the reverse lights with the Dual Function Amber / White Reverse LED Modules (Part #5915-JT-023) to improve road compliance.

Additional note: Some halogen-equipped Gladiators may also require a programmer to prevent park lights from shutting down.

Install Guide Resistor Diagram

Installation: Simple bolt-in installation using factory mounting points. Most customers complete installation in under 30 minutes with basic hand tools.

Fits: 2020, 2021, 2022, 2023, 2024, 2025, and 2026 Jeep Gladiator JT

Compatible Trims: Sport, Sport S, Overland, Rubicon, Mojave, High Altitude, Willys, Texas Trail, and 4xe

Note: Designed for North American market vehicles. European / Export models may require additional modules for full compliance.

Customers who purchase these tail lights frequently add these products to complete their Gladiator JT rear lighting build:

A Tail Light Redesigned for the Gladiator's True Potential

The factory tail lights on the Jeep Gladiator JT were designed to meet a spec. These were designed to exceed it. The ORACLE Lighting Flush Mount LED Tail Lights wrap tightly around the truck bed, protruding significantly less than the factory lights - a low-profile design that reduces the risk of trail damage while keeping your rig looking sharp.

Available in Standard Red and a Blacked-Out Tinted version, these lights are the clean, capable upgrade your Gladiator deserves.

Form That Follows Function

Wrap-Around Visibility From Every Angle

Because of the nearly flush wrap-around design, the lighting can be visible from any rear angle - a meaningful safety and style advantage over the factory setup. Whether you're pulling out of a campsite, backing up a trailer, or navigating tight trails, other drivers will always have a clear sightline to your lights.

Signature Perimeter Lighting

The ORACLE JT Flush Tail Lights feature signature perimeter lighting that traces the edge of the housing for a distinctive, premium appearance.

10 High-Powered LED Reverse Lights

The reverse light features 10 high-powered LEDs for optimal rear illumination - a substantial upgrade over the factory reverse light.

Plug-and-Play Installation - No Cutting, No Splicing

The ORACLE JT Flush Tail Lights are engineered for a direct OEM replacement experience. The factory cross-traffic sensor module transfers directly from your stock assembly - no modification, no custom wiring, no loss of functionality. Compatible with both base and LED factory packages.

A Note for Halogen-Equipped Gladiators

Factory halogen-equipped Jeeps may experience issues such as reverse lights strobing or shutting down. If this occurs, connect the included resistors per the included diagram. For Jeeps where park lights shut down, a programmer such as a Tazer can also resolve the issue.

Built to Last - IP67 Waterproof Rated

The ORACLE JT Flush Tail Lights carry an IP67 waterproof rating - fully sealed against dust and rated for water immersion. River crossings, heavy rain, pressure washing after muddy trails - these lights are built to take it.

Two Styles to Match Your Build

Standard (Clear/Red): Classic, clean, and OEM-complementary while being unmistakably an upgrade.

Tinted (Blacked-Out): Smoked lens that blends seamlessly with blacked-out trim packages. Pairs perfectly with the ORACLE Racetrack Flush Style LED Tailgate Panel Light.

What's in the Box

Each purchase includes one pair of ORACLE Flush Mount LED Tail Lights for the Jeep Gladiator JT, plus an online instruction guide. Fitment: 2020-2026 Jeep Gladiator JT (all trims) - North American models.

FAQs: Flush Mount Tail Lights for Jeep Gladiator JT

Q: Will the ORACLE Flush Mount Tail Lights fit my Jeep Gladiator JT?

Yes. These lights are designed specifically for the Jeep Gladiator JT (2020-2026) in all North American trim levels.

Q: Do these tail lights work with the Gladiator's factory blind spot / cross-traffic sensor?

Yes. The cross-traffic sensor swaps directly over from the factory assembly with no modification required.

Q: My Gladiator has halogen tail lights from the factory. Will these still work?

They will work, but halogen-equipped Jeeps may experience reverse light strobing or shutoff. Connect the included resistors as shown in the diagram. Some Gladiators may also need a programmer (such as a Tazer) to prevent park lights from shutting down.

Q: What is the IP rating on these lights, and are they truly waterproof?

IP67 rated - completely sealed against dust and rated to withstand water immersion. Fully suited for off-road use in rain, river crossings, and mud.

Q: What's the difference between the standard and tinted versions?

Both versions deliver identical LED performance. The standard version features a traditional red and clear lens; the tinted version uses a smoked lens for a blacked-out appearance.

Q: Are these compatible with the ORACLE Racetrack Tailgate Panel Light?

Yes. The ORACLE Racetrack Flush Style LED Tailgate Panel Light is designed to work with the JT Flush Tail Lights for a cohesive, fully integrated rear lighting system.

Q: How hard is the installation - do I need a mechanic?

Most Gladiator owners complete this install in under an hour without professional help. No cutting or splicing required - true plug-and-play.